LED Lighting Terms Everyone Should Know

LED lighting is a rapidly growing technology that is quickly becoming the go-to lighting solution for a wide range of applications. The benefits of LED lighting are numerous, including energy efficiency, long lifespan, and versatility. In this article, we will discuss some of the most important LED lighting terms that everyone should know.

Energy Efficiency

LED lighting is highly energy efficient, which means that it uses less energy to produce the same amount of light as traditional lighting sources. This is because LED lights convert almost all of their energy into light, while traditional lights convert only a small percentage of their energy into light. This means that LED lights can save you money on your energy bill and reduce your carbon footprint.

Long Lifespan

LED lights have a much longer lifespan than traditional lighting sources. This is because they do not burn out like traditional lights, but instead gradually degrade over time. On average, an LED light can last up to 50,000 hours, which is more than 20 years of continuous use. This makes them an ideal choice for applications where lights are difficult to access or replace, such as in high ceilings or hard-to-reach areas.


LED lights are highly versatile and can be used in a wide range of applications. They are available in a variety of colors and intensities, and can be used for both indoor and outdoor lighting. They can be used for task lighting, accent lighting, and even as a replacement for traditional streetlights.

Color Temperature

Color temperature is a measure of the color of light emitted by a light source. It is measured in Kelvin (K) and ranges from warm white (2700K) to cool white (6500K). Warm white is a yellowish-white color that is often used in residential settings, while cool white is a bluish-white color that is often used in commercial settings.


Lumens are a measure of the total amount of light emitted by a light source. The higher the lumens, the brighter the light. When comparing LED lights to traditional lights, it is important to compare the lumens rather than the watts, as LED lights use less energy to produce the same amount of light.

Light emitting diode (LED)

LED (short for Light Emitting Diode) is a two-LED semiconductor light source that emits light when an electric current is passed through it. During this process,Guest Posting energy is released in the form of photons. Without getting too technical, what you really need to know is that LEDs are more efficient at converting energy into light compared to incandescent and fluorescent models. Consuming less energy, LEDs last much longer and don’t generate as much heat as traditional picture lights, for example.

Built-in LEDs allow you to get a thin profile with a thickness of 1/2′′. Today, more and more lighting fixtures use built-in LEDs. These are LEDs built into the luminaire on a permanent basis, as opposed to devices with removable LED lamps. The advantage of built-in LEDs is that they allow lighting manufacturers to create sleeker and thinner fixtures. With a thickness of less than 1.5 cm, these innovative LED models can be installed in places where no other recessed luminaire can. For example, a lot of LED users like to install them to highlight art, and all modern picture lighting is based on a LED lighting.

So how long do LEDs last? A very long time! Most LED bulbs typically last between 25,000 and 50,000 hours. For comparison, a typical incandescent lamp lasts about 1,000 hours, up to a maximum of 2,000 hours. LED lighting does not burn out like traditional light sources; instead, it slowly fades over time. Often, when buying an LED fixture, you will see the inscription “50,000 hours to 70 percent” (“L70”). This means you can expect LED lighting to last at least 50,000 hours, by which time it will be at least 70 percent of its original power (down 30 percent). The long lamp life combined with the low power used to create the light is what makes this technology so promising.

One of the best things about LED technology is that it allows you to create your own custom lighting design using different color temperatures, brightness, warmth and efficiencies.

Correlated Color Temperature (CCT)

Most LED fixtures offer a choice of color temperatures in various shades of white. This temperature, or CCT, is measured in degrees Kelvin (K) on a scale of 1,000 to 10,000. The higher the Kelvin, the closer the luminaire’s color rendering is to real sunlight. Warmer whites typically have a temperature of 3000K or lower, while neutral whites typically have a temperature of 4000K. Temperatures of 5000K and above on the Kelvin scale result in “cool” white light. Typically, the Kelvin temperature for commercial and residential lighting fixtures is somewhere between 2500K and 5000K. It is important to consider color temperature when choosing a light fixture so that the look and feel of the light matches the mood and atmosphere you are trying to create.

Color rendering index (CRI)

The CRI scale gained popularity as LEDs became more widely used in homes. CRI goes hand in hand with color temperature in choosing the right lighting for your application. Basically, CRI is an assessment of how well a light source renders the colors of objects in their natural form. Think of it this way: in today’s social media world, we’re used to seeing things shown through various filters and apps that change how an object or item looks in real life. The goal of CRI is to remove the filters and accurately display colors as they are, from a piece of art hanging on the wall to food being prepared in the kitchen. On a CRI scale of 1 to 100, LED light sources with a CRI of 90+ are considered the best in terms of color rendering. The higher the CRI, the more accurate colors will appear under LED lighting.

Power and luminous flux (watts and lumens)

When shopping for LED lighting, you often see lumens and watts being used together. For example, Lm/W = lumens per watt. Many people think of watts as a measure of light output. In fact, it is the number of lumens that is used to measure the “perceived power” of light. The more lumens, the brighter the light appears. A watt is a unit of electrical power that measures the amount of energy you use, which is what you pay for on your utility bills.

“Lumens per watt” is an important consideration when buying LED lighting. For example, a certain LED lamp can consume as little as 9 watts while providing 1000 lumens. At the same time, an equivalent incandescent lamp consumes 100 watts to produce the same number of lumens.


Lighting control is becoming more and more popular, as is consumer demand for a smart home. Being able to adjust the level of light in a room is very important, so we recommend using dimmers wherever possible. Good LED lighting manufacturers use dimmable LEDs, but it’s important to always check this when buying and don’t assume that every fixture is dimmable. Dimming is another way to save energy and reduce operating costs.

Related Posts